免费99精品国产自在现线观看,午夜在线播放免费人成无,亚洲国产香蕉视频欧美,大色香蕉色视频大全,九九热国产精品视频,亚洲热热久久九九精品,精品在线视频播放

Product introduction

Application of W5-48 high temperature centrifugal fan:

W5-48 high-temperature centrifugal air is mainly used for conveying high-temperature gas with a medium temperature below 600 ℃ that does not spontaneously ignite, is harmless to the human body, and is non-corrosive to steel materials. The dust and hard particles contained in the gas are not more than 150mg /m3.

W5-48 high temperature centrifugal fan structure:

(1) Impeller: It is welded by 12 backward-inclined flat-shaped blades, an arc-conical front disk and a flat-shaped rear disk, and the material is made of heat-resistant stainless steel.

(2) Air inlet: Convergent and streamlined, fixed on the fan inlet side.

The volute is welded with steel plates , and the casing can be made into a whole or two-open or three- open structure. For the induced wind, the volute plate is appropriately thickened to enhance its wear resistance.

(4) Transmission group: It is composed of main shaft, water cooling device, bearing and so on.

Type of W5-48 high temperature centrifugal fan:

(1) The fans are single suction, and the machine numbers include No.5.5, 6, 6.3, 10, 11.5, 12.5 and other machine numbers.

the outlet directions can be made into left and right 45°, 135°, 225°, and 270°. , In addition to indicating the left and right rotation, the user also needs to indicate the angle of the air outlet when ordering.

forms of left and right rotation . When viewed from one end of the motor, if the impeller rotates clockwise, it is called a right-handed fan, which is represented by "right"; if it rotates counterclockwise, it is called a left-handed fan. Indicated by "left".

(4) The transmission of the fan is C-type and D-type, and C-type and D-type represent pulley drive and coupling drive respectively.

W5-48 High Temperature Centrifugal Fan Parameters